Countrywide delivery within 24–48 hrs — order before 3PM for same-day dispatch

Shop Hot Deals → +254 728 163329

Threaded male adapter

Sale!

Threaded male adapter

Price range: KSh80 through KSh1,800

HDPE compression male adapter with an external male thread and a compression grip for HDPE or LDPE pipe. Tough, ductile polypropylene body; the joint holds through pipeline expansion and contraction. Nine sizes, 20 mm to 110 mm, PN16 to PN25. Sale from KSh 80.

SKU: N/A Category: Tag:

Delivery & Returns

Countrywide Delivery Fast, reliable shipping to any part of Kenya. Shipped within 24-48 hours.
Warranty & Returns Genuine product warranty & easy return policy on manufacturer defects.
Need Help Ordering? Call / WhatsApp support: +254 728 163329

Description

HDPE Compression Male Adapter

An HDPE compression male adapter joins the plain lock end of an HDPE pipe to a threaded irrigation component.

One end grips the pipe. The other end carries an external male thread.

The fitting therefore turns a push-fit pipe run into a screw connection for valves, filters and tank outlets.

Sizes follow the pipe outside diameter, and the pressure rating follows the pump or gravity head.

Threaded male adapter

The shop lists this fitting as a threaded male adapter.

Both names describe one part. The compression end takes the pipe, and the threaded end screws into a female port.

In contrast, a female adapter carries an internal thread. See the HDPE female adapter for that port.

Because the thread is external, this adapter pairs with internally threaded filters, tank connectors and valves.

 

HDPE Compression Male Adapter Sizes and Prices

Nine sizes are stocked.

Each size matches one pipe outside diameter.

Size Pipe OD Regular Sale SKU Stock
½” 20 mm KSh 120 KSh 80 eu1755 In stock
¾” 25 mm KSh 180 KSh 140 eu1757 In stock
1″ 32 mm KSh 250 KSh 200 eu1754 In stock
1¼” 40 mm KSh 400 KSh 300 eu1753 In stock
1½” 50 mm KSh 450 KSh 350 eu1752 In stock
2″ 63 mm KSh 550 KSh 450 eu1756 In stock
2½” 75 mm KSh 1,000 KSh 900 none In stock
3″ 90 mm KSh 1,400 KSh 1,200 none In stock
4″ 110 mm KSh 2,000 KSh 1,800 none In stock

Typically the three largest sizes carry no SKU in the shop yet.

Nominal sizes run from 20 mm to 110 mm. Prices are per fitting, and the sale price applies at checkout.

HDPE compression male adapter with green cap and external black thread
Green cap and black male thread on the stocked 20 mm fitting, photographed on white tile.

 

How an HDPE Compression Male Adapter Seals

Five parts do the work.

HDPE compression male adapter parts exploded diagram labelled A to E
Exploded view letters A to E match the parts table below, in assembly order.
Mark Part Material Colour
A Cap Polypropylene Blue, green or black
B Clinching ring Acetal resin White
C Blocking bush Polypropylene Black
D O-ring seal Rubber Black
E Body Polypropylene Black

Tightening the cap drives the clinching ring onto the pipe.

The O-ring seals behind it. Therefore water cannot track back along the pipe wall.

The blocking bush stops the pipe sliding out under pressure.

Because the grip is mechanical, the joint holds through expansion and contraction.

Also the polypropylene body stays tough and ductile in sun and soil.

Plastic parts do not rust, so corrosion cannot cloud the irrigation water.

The pipe itself is high-density polyethylene, a thermoplastic rated for pressure line.

 

HDPE Compression Male Adapter Pressure Rating

Ratings cover PN16 and PN25.

PN is the nominal working pressure in bar. A larger PN number means a stronger fitting body.

Match the rating to the water driving force, not to the pipe alone.

For example, a pump delivers pressure while gravity delivers only the head from the slope.

Hence a gravity scheme from a low tank needs less rating than a pump line.

However, never exceed the marked PN on a pressurised borehole or pump main.

 

Fitting an HDPE Compression Male Adapter Step by Step

Work in this order.

  1. First cut the pipe square and remove the burr.
  2. Next slide the cap, then the clinching ring, onto the pipe.
  3. Push the pipe past the O-ring into the body.
  4. Hand-tighten the cap, then finish with a spanner quarter turn.
  5. Finally wrap the male thread with PTFE tape and screw it home.

Do not overtighten plastic threads, because they crack before they seal.

The compression end needs no tape or glue. Use a spanner quarter turn instead of force.

Two male threads will not join, so check the port first.

 

HDPE Compression Male Adapter vs Female and Tee Fittings

Pick by the port thread.

Fitting Thread Job
Male adapter External Screws into a female port
Female adapter Internal Receives a male port
Tee or elbow None Branches or turns the pipe run

A straight adapter never branches the line.

For a Y or L run, use HDPE tees or HDPE elbows instead.

Similarly, the HDPE threaded male and female adapters page compares both thread sexes side by side.

 

Where an HDPE Compression Male Adapter Fits

Four jobs cover most farms.

For instance, most irrigation water filters carry female ports, so the male adapter screws straight in.

Also a tank connector gives a male or female outlet to match.

A ball cork or ball valve with a female port takes this adapter.

The compression end grips HDPE and LDPE irrigation pipes alike.

Specifically on a borehole main, keep every fitting at or above the pump pressure.

 

HDPE Compression Male Adapter Frequently Asked Questions

Six quick answers.

Which thread does it carry?

An external male thread, from ½ inch to 4 inch.

Does it need glue?

No. The compression grip and O-ring seal without solvent.

Can it join two pipes?

No. Instead use a coupling for pipe-to-pipe joints; see couplings.

What pressure suits drip lines?

Typically drip runs below 3 bar, so PN16 covers them.

Is the 110 mm size in stock?

Yes. All nine sizes show in stock today.

Does it fit LDPE pipe?

Yes, where the outside diameter matches the size table.

 

Order an HDPE Compression Male Adapter in Kenya

All nine sizes ship countrywide.

Order through the shop cart; delivery runs countrywide.

For a whole scheme, the corporate team covers drip irrigation systems in Kenya as an installed service.

Therefore this page covers the fitting itself: sizes, prices, parts and pressure.

Additional information

Weight 0.075 kg
Size

20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm

color

Blue, Orange

Call Us WhatsApp