Description
Couplings / Middle Connectors
Couplings join two lengths of pipe into one continuous, leak-free line. Eunidrip Irrigation Systems stocks them in ten sizes, from 16mm to 110mm, for drip, sprinkler and water supply networks.
Therefore a broken or short line no longer means replacing whole pipe runs. Moreover the same fitting family covers new installs, extensions and field repairs.

Couplings Sizes and Prices in Kenya
The table lists every size we stock with its current price in Kenya shillings. Specifically the 16mm row shows the sale price, reduced from KSh 30 to KSh 20. Moreover the range covers both barbed drip connectors and compression fittings for PE pipe.
| Coupling size | Price (KSh) |
| 16mm | 20.00 |
| 20mm | 130.00 |
| 25mm | 180.00 |
| 32mm | 250.00 |
| 40mm | 400.00 |
| 50mm | 500.00 |
| 63mm | 800.00 |
| 75mm | 1,200.00 |
| 90mm | 2,500.00 |
| 110mm | 3,300.00 |
However the barbed and compression ranges price differently, so confirm which type a size row covers before you order. Consequently your quotation matches the fitting you actually need.
Types of Couplings We Stock
Six coupling patterns cover almost every joint on a farm. The table below matches each pattern to its job, so you can pick before you buy.
| Pattern | What it joins | Typical job |
|---|---|---|
| Straight | Two pipes of the same diameter | Extending a line or replacing a damaged section |
| Reducing | A mainline to a smaller lateral | Stepping down size and pressure between system sections |
| Repair / slip | A leak or break in an existing pipe | Emergency fixes without cutting out long runs |
| Compression | PE pipe ends, no glue or welding | Quick installs that open again for maintenance |
| Threaded | Male-threaded pipe ends | Lines that move or open frequently |
| Barbed | Soft drip pipe and layflat | Tool-free joints inside drip networks |

For the reducing pattern we list a dedicated reducer coupling. The barbed pattern also ships as a drip tape connector. Likewise threaded joints pair with our male adapter range. With this selection you can match the exact pattern and size to your layout.
Where Couplings Fit in an Irrigation System
Drip networks use these fittings at every lateral and sub-main joint. For example tomato, onion, capsicum and leafy-green beds all depend on them holding pressure.
- Sprinkler networks: keep pressure steady across large fields and lawns.
- Greenhouses: link pipes for flowers, herbs and berries under cover.
- Water supply lines: repair or extend domestic and commercial pipelines.
- Gardens and landscaping: join lines for lawns, ornamentals and flower beds.
- New drip installs: connect laterals and sub-mains from the first layout.
As a result one fitting family serves a kitchen garden and a commercial farm alike.
Why These Couplings Last in Kenyan Fields
The bodies are moulded from UV-resistant plastic that shrugs off sunlight, farm chemicals and line pressure. Therefore they resist cracking and corrosion through hot northern dry seasons, coastal humidity and cool highland nights.
Compatibility runs across LDPE, HDPE and PVC pipe plus standard drip tubing. Specifically our pvc pipes listing and the HDPE pipe fittings page list the matching sizes.
Choosing and Fitting Couplings
First match the fitting to the pipe outside diameter, not the thread you hope it has. Barbed couplings push into soft pipe by hand, while compression nuts seal PE pipe without glue or welding. Therefore most joints need no special tools, which saves labour on a long line.
Otherwise a wrong size weeps at the joint and drops pressure across the whole block. Consequently a slip coupling over the break restores flow without cutting out long pipe runs. Because every leak steals pressure, the far end of the block shows crop stress and lost yield first.
Couplings: Frequently Asked Questions
What is the difference between a coupling and a middle connector?
None. Middle connector is the trade name for the same pipe coupling.
Which sizes do you stock?
Ten sizes, from 16mm to 110mm, as listed in the price table above.
Do compression couplings need glue or welding?
No. The nut compresses a grab ring and seal onto the pipe, so the joint opens again for maintenance.
Can I repair a leaking drip line without replacing it?
Yes. A slip or barbed coupling bridges the break, and barbed types fit by hand.
Do you deliver outside Nairobi?
Yes. We supply Nakuru, Eldoret, Kisumu, Mombasa and other counties, with fitting advice after sale.
Order Couplings from Eunidrip
Eunidrip supplies irrigation systems across Kenya, so fitting advice comes from field experience. Specifically the team confirms type and size against your pipe before you pay. Competitive pricing keeps the fitting cost small against the pipe it joins, season after season. Finally browse the pipe fittings category or send your pipe sizes through the contact page for a quotation. For material background see Wikipedia’s HDPE article.








