Description
HDPE Tee Fittings: Male and Female Tees
An HDPE tee splits one pipe run into two, and we stock both male tee and female tee models from 20mm to 110mm. Every HDPE tee fitting is UV-stabilised and pressure-rated for farms, greenhouses, and water supply lines across Kenya. Call 0724 775 516 for prices.
What Is an HDPE Tee?
A tee carries three ports: one on each side of the body, plus one branch at 90 degrees. HDPE tee fittings come in two families. The first is the equal tee, where all three ports match the pipe size. The second is the reducing tee, where the branch runs smaller than the main line.
Also, these fittings connect in three different ways:
- Compression — tightens with a nut and sleeve, using only hand tools.
- Butt fusion — melts the pipe and fitting together for a permanent joint.
- Threaded — carries a male or female thread for adapters and valves.
Threaded models are the ones listed here as male tee and female tee. Because the branch ends in a thread, you can bolt equipment straight onto your pipeline.
HDPE Male Tee — Common Uses
A male tee has an external thread on its branch. In practice, that thread screws into a female port. Typical uses:
- Connecting HDPE pipe lines to valves
- Joining irrigation laterals to threaded fittings
- Building branch connections on water supply mains
- Linking pipe runs to pumps and filter units
First, start the thread by hand before you apply any torque. Also, match the thread size carefully. Cross-threading causes most leaks at these joints, because a forced thread never seats squarely.
HDPE Female Tee — Common Uses
A female tee carries an internal thread instead. As a result, it receives a male adapter, nipple, or threaded tail. In practice, most buyers pick this style when the equipment already has a male thread on it. Usual applications:
- Connecting male adapters into an HDPE pipeline
- Creating a branch from a water supply main
- Mounting valves and irrigation accessories
- Joining pipe sections that carry threaded tails
Next, hand-tighten and then add one controlled final turn. Over-tightening stresses the thread and shortens the life of the fitting.
Male Tee vs Female Tee: Key Differences
| Feature | HDPE male tee | HDPE female tee |
|---|---|---|
| Thread type | Male (external) | Female (internal) |
| Connection | Screws into a female part | Receives a male part |
| Typical partner | Female adapter, valve, socket | Male adapter, nipple, valve |
| Best for | Branches that reach into equipment | Branches that accept a threaded tail |
| Failure to avoid | Forcing a mismatched thread | Torqueing past hand-tight |
HDPE Tee Sizes and Specifications
- Material: UV-stabilised HDPE, or compatible engineering plastic
- Fitting type: male tee or female tee
- Sizes: 20mm to 110mm, by model
- Connection: compression, butt fusion, or threaded
- Application: irrigation, water supply, greenhouses, plumbing
- Outdoor use: suitable on UV-rated stock
Polyethylene pipe and fittings for water supply follow ISO 4427, the international PE piping standard. That standard is why we quote pipe outside diameter, rather than nominal bore, when we size a tee.
Therefore, always match the tee to your pipe outside diameter and your working pressure. For example, a 25mm line needs a 25mm seat. Meanwhile, a gravity line and a pump-fed line do not need the same rating. Browse HDPE compression couplings for matching joints, and HDPE adapters for the threaded tails each tee joins.
How to Choose the Right HDPE Tee
Before you order, work through four checks:
- Pipe outside diameter. Read the printing on the pipe; never guess from the look of the joint.
- Thread direction. Male goes into a female port, and female receives a male tail.
- Working pressure. Add your pump head to the longest run, then match the rating.
- Sun exposure. Pick UV-stabilised stock above ground; standard stock is fine buried or shaded.
Because each tee comes down to these four numbers, send us your pipe size and pressure and we will shortlist the model for you.
Quality Features of Eunidrip HDPE Tees
- Strong construction for normal irrigation working pressure
- UV resistance on stabilised stock, for outdoor installs
- Corrosion resistance, unlike metal fittings
- Chemical resistance for fertigation and agricultural water
- Leak-resistant joints when correctly matched and installed
- Lightweight, so transport and handling cost less
- Long service life once fitted properly
HDPE Tee Fittings — Frequently Asked Questions
What sizes of HDPE tee do you stock in Kenya?
We carry tee fittings from 20mm up to 110mm, which covers most drip, sprinkler, and supply work.
Can I use an HDPE tee for hot water?
No. HDPE tee fittings are rated for cold and ambient water in irrigation and supply duty.
Do I need glue or a fusion machine?
Compression and threaded models need only hand tools. Butt-fusion models, however, need a fusion machine.
Which side should the thread face?
Face the thread toward the component you are joining. A male tee goes into a female port, and a female tee receives a male one.
Will UV exposure damage the fitting?
UV-stabilised HDPE resists sunlight in outdoor service. For buried or shaded lines, standard stock is fine.
Where can I buy HDPE tee fittings in Kenya?
Order from Eunidrip in Nakuru, or buy online for countrywide delivery. Call 0724 775 516 / 0728 163 329 for prices and quotations.
Where to Buy HDPE Tee Fittings in Kenya
Finally, order your HDPE male tee, female tee, and threaded adapters today and get delivery anywhere in Kenya. Also, our reducer tees cover mixed pipe sizes, while drip irrigation fittings finish the lateral lines. Call us on 0724 775 516 / 0728 163 329 to place your order or send a quotation request. Visit us in Nakuru or connect online for delivery across Kenya.
HDPE Tee Prices in Kenya
| HDPE Tee Type | Colour | Size | Price (KSh) |
|---|---|---|---|
| Male / Female | Blue / Green | ½ inch | 150 |
| Male / Female | Blue / Green | ¾ inch | 200 |
| Male / Female | Blue / Green | 1 inch | 350 |
| Male / Female | Blue / Green | 1¼ inch | 450 |
| Male / Female | Blue / Green | 1½ inch | 650 |
| Male / Female | Blue / Green | 2 inch | 750 |
| Male / Female | Blue / Green | 2½ inch | 1200 |
| Male / Female | Blue / Green | 3 inch | 2800 |
| Male / Female | Blue / Green | 4 inch | 4,500 |
