Description
HDPE female adapter
An HDPE female adapter is a compression fitting with a female thread on one end. The compression end grips plain HDPE or LDPE pipe, while the threaded end screws onto any male fitting. Therefore it joins a pipe run to valves, filters, pumps and tank connectors. Eunidrip Irrigation Systems stocks it in nine sizes, 20 mm up to 110 mm.
Because the thread is internal, the adapter pairs with externally threaded components. The polymer body shrugs off corrosion, so the water stays clean. Our HDPE pipe listing shows the pipe it grips, and the threaded male adapter is its mating half.
HDPE Female Adapter Sizes and Prices in Kenya
Nine compression sizes are stocked, each tied to a pipe outside diameter and a male thread. Was and now prices per fitting appear below.
| Pipe size | Outside diameter | Male thread | Was (KSh) | Now (KSh) |
|---|---|---|---|---|
| ½” | 20 mm | ½” | 120 | 80 |
| ¾” | 25 mm | ¾” | 180 | 140 |
| 1″ | 32 mm | 1″ | 250 | 200 |
| 1¼” | 40 mm | 1¼” | 330 | 300 |
| 1½” | 50 mm | 1½” | 400 | 350 |
| 2″ | 63 mm | 2″ | 500 | 450 |
| 2½” | 75 mm | 2½” | 950 | 850 |
| 3″ | 90 mm | 3″ | 1,400 | 1,250 |
| 4″ | 110 mm | 4″ | 2,000 | 1,800 |
Each price is for one fitting at the current sale rate. For bulk quantities we quote separately; send the size and count you need. A pump outlet or filter head takes one adapter per port. Therefore order one per threaded port, plus a spare for maintenance.

How the HDPE Female Adapter Connects
The fitting has two working ends. First, the compression end takes the plain pipe: a cap nut compresses a clinching ring onto the pipe wall. Then the female thread at the other end screws onto a male fitting. As a result, one part bridges pipe and thread. Because both ends seal independently, a leak at one end does not condemn the other.
The grip is mechanical, so the joint needs no glue or solvent. The female thread follows standard pipe thread forms, so it mates with common threaded fittings. Hand-tighten plus a spanner turn seals the thread. However, the female thread only seals against a matching male form, so confirm the thread standard before buying.
The adapter joins pipe to a threaded component in a straight line. Bends and branches need elbows and tees instead, so choose the adapter only for a straight pipe-to-thread transition. Our HDPE elbows cover the bend. Because the body is full-bore, it does not constrict the flow, so water passes at line velocity without a pressure build-up at the fitting.
The grip flexes with the pipe as temperatures swing. Therefore the joint rides out expansion and contraction without backing off, which keeps the seal live season after season.
HDPE Female Adapter Pressure Rating (PN16 to PN25)
The pressure nominal class runs PN16 to PN25. PN states the working pressure the polymer tolerates, so a higher PN denotes a stronger body. Choose the class against your line pressure, not against the pipe size alone.
Bodies are high-density polyethylene with polypropylene nuts, a combination that resists the corrosion which can spoil irrigation water quality. Size follows the nominal diameter, the inside diameter of the pipe you are joining. The usual plastic compression class spans 20 mm to 91 mm, while this listing stocks 20 mm to 110 mm.
Match the PN to your water driving force. Typically a gravity-fed line sits at the lower PN class, while pump outlets need the higher one. The slope of the land sets the gravity head, so measure it before choosing the class.
What an HDPE Female Adapter Connects To
An HDPE female adapter can connect to many irrigation and plumbing components. The table lists the common mates and what each joint does.
| Component | Function of the connection |
|---|---|
| HDPE pipe | Forms the main pipeline connection. |
| Male threaded adapter | Creates a secure threaded joint. |
| Ball valve | Allows water flow to be opened or shut off. |
| Gate valve | Controls water supply in larger pipelines. |
| Disc filter | Connects filtration systems to the pipeline. |
| Screen filter | Filters dirt and debris before water enters the system. |
| Water pump | Connects pump outlets to HDPE pipes. |
| Pressure regulator | Helps maintain the correct operating pressure. |
| Water meter | Measures water usage in irrigation systems. |
| Fertigation unit | Connects fertilizer injection equipment to the line. |
| PVC male threaded fittings | Joins HDPE systems to PVC pipelines where required. |
For filtration heads, our threaded water filters screw straight onto the female end. Similarly, tank connectors and ball valves use the same male thread. In practice, the filter head and the pump outlet are the two most common female-adapter jobs on a farm.
HDPE Female Adapter Parts and Materials
Each adapter breaks down into five marked parts. Specifically, the cap, ring, bush, O-ring and body each carry one job. The table gives the material and colour of every part.
| Part | Mark | Material | Colour |
|---|---|---|---|
| Cap | A | Polypropylene, high grade | Blue, green or black |
| Clinching ring | B | Acetal resin | White |
| Blocking bush | C | Polypropylene, high grade | Black |
| O-ring gasket | D | Rubber | Black |
| Body | E | Polypropylene, high grade | Blue or green |

A blocking bush limits how far the pipe enters the body, so the clinching ring always meets its seat. That repeatability is why the joint can be opened and refitted without losing grip. Also, the white clinching ring is the wear part to inspect first.
Fitting an HDPE Female Adapter Correctly
Start with a square cut and deburr the pipe. Slide the cap nut, then the clinching ring, over the pipe. Push the pipe home into the body until it seats. Snug the cap nut by hand and finish with a quarter turn on a spanner.
Inspect the O-ring before you tighten; a twisted ring weeps under pressure. Do not crank the nut hard, because polymer nuts crack when overtightened. No glue or tape belongs on the compression end.
On the threaded end, tape or paste the male thread first, then run the adapter on hand-tight plus a spanner turn. Also look for cracks in the clinching ring, since a split ring cannot grip. Finally, pressure-test the joint before covering or burying the line.
HDPE Female Adapter Frequently Asked Questions
What is the difference between a female and male adapter?
A female adapter has internal threads; a male adapter has external threads. Therefore the two screw together. Both grip plain pipe at the other end.
What pressure can it hold?
The class spans PN16 up to PN25; the exact limit follows size and class. PN states the working pressure of the body.
Which size do I choose?
Match the pipe outside diameter, 20 mm through 110 mm (20, 25, 32, 40, 50, 63, 75, 90, 110). The male thread must match the mating fitting.
Can I reuse the adapter?
Yes. Back off the nut, pull the adapter off and refit it on a fresh pipe end. Fit a new O-ring whenever the old one is cut or flattened.
Does it need thread tape?
The compression end needs none. The female thread seals against a taped or pasted male thread, so tape the male side only.
Is it cheaper than a brass adapter?
Polymer adapters resist corrosion and cost less than brass. Prices start at KSh 80 on sale for the 20 mm size.
Order HDPE Female Adapter in Kenya
Eunidrip Irrigation Systems supplies HDPE female adapter fittings in all nine sizes, with countrywide delivery. Phone, WhatsApp or email us for a quotation. Single fittings and contractor bulk orders are both welcome.
Finally, pair the adapter with the right pipe and fittings. Our male and female adapter set and couplings round out the line; the HDPE pipe fittings guide walks the full range.





