Countrywide delivery within 24–48 hrs — order before 3PM for same-day dispatch

Shop Hot Deals → +254 728 163329
0

Hdpe Puncher

-13%
Hdpe punch

Hdpe Puncher

Original price was: KSh800.Current price is: KSh700.

HDPE Puncher

An HDPE puncher is a hand tool specially designed to make uniform holes in High-Density Polyethylene (HDPE) pipes. Unlike using nails, knives, or drills, an HDPE puncher creates a perfectly sized hole that matches irrigation fittings, ensuring a secure and leak-free connection.It creates clean, accurate holes in HDPE pipes, allowing farmers to install start connectors, take-off connectors, grommets, valves, and other irrigation fittings without damaging the pipe.

Category:

Delivery & Returns

Countrywide Delivery Fast, reliable shipping to any part of Kenya. Shipped within 24-48 hours.
Warranty & Returns Genuine product warranty & easy return policy on manufacturer defects.
Need Help Ordering? Call / WhatsApp support: +254 728 163329

Description

Hdpe Puncher

Hdpe Puuncher also known as manual driller is essential for making holes to enable fixing of the starters and the drip take offs of the same dimensions.

These irrigation tools are very useful where there is no electricity since it has circular sharp metallic ends that is used to punch into irrigation sub main lines.

These Hdpe puncher require some energy to push the cutting edge deep into the Hdpe pipe. the punch makes the  holes  which are of the same nominal diameter as the take offs and starters.

For farmers growing vegetables, fruits, flowers, maize, or fodder, using the correct HDPE punchers makes irrigation installation faster, neater, and more reliable. A properly punched hole also prevents water leaks and helps the entire irrigation system perform efficiently.

Using the right puncher helps to:

  • Reduce water leakage.
  • Improve water pressure.
  • Speed up irrigation installation.
  • Protect the HDPE pipe from cracking.
  • Increase the lifespan of the irrigation system.

Functions of Hdpe Puncher

  • making holes into Hdpe pipe to fix takeoffs and starters
  • removing of unwanted takeoffs and starters extensions

  • Common HDPE Puncher Sizes

    HDPE punchers come in different sizes to match various irrigation fittings. Using the correct size ensures fittings fit firmly and do not leak.

    HDPE Puncher Size Common Use Suitable Fittings
    12 mm Medium irrigation installations Start connectors, take-off connectors and rubber grommets
    16 mm Larger irrigation installations Large start connectors, valves and mainline fittings

    The 12 mm and 16 mm HDPE punchers are among the most commonly used sizes for installing irrigation fittings on HDPE mainlines in Kenya.

    How to Use an HDPE Puncher

    Installing fittings with an HDPE puncher is simple.

    1. Measure and mark the position where the fitting will be installed.
    2. Hold the HDPE pipe firmly on a stable surface.
    3. Press the puncher straight into the pipe using steady pressure.
    4. Twist the puncher slightly if necessary.
    5. Remove the puncher carefully.
    6. Insert the connector or fitting immediately to achieve a tight seal.

Other irrigation tools related to Hdpe Puncher

This punch are highly related to irrigation tools like starters, takeoffs and drip valves. These tools are of the same diameters with the punch therefore whenever a Hdpe punch is touched, the mentioned tools must accompany the tool.

Takeoff connectors drip fitting

These drip fittings that are used to connect two different sections of drip and the water supply lines. They come in different designs and colors. Most of these takeoff connectors are complete with black or may have a blue lock or yellow color. Standard drip takeoff connector can sustain a working pressure of up to 16 bars but most of the systems of irrigation work best at a pressure of three bars and below.

The working pressure of the takeoff connectors is very critical since it determines the type of drip line to be used. The high working pressure of the takeoff connector requires a pressure compensated drip line rather than an uncompensated pressured drip line.

Drip takeoff connectors come in various sizes depending on the types of drip lines or drip tapes available in the market. But the known available drip tape sizes are the 12mm and 16mm nominal diameters

Takeoff connectors are commonly used with competent irrigation equipment like drip start connectors grommet rubbers and the pipe punchers.

Pipe puncher is used to make holes on sub-main lines. For the takeoffs to be correctly installed with little or no leakages, the grommet rubbers of different diameters are installed before takeoffs to seal the drilled holes in the sub mainline.

The connectors can be used together with riser. Riser is the pipe that connects underground water supply (main line) to drip tape.

Furthermore, when installing the takeoff, first take into consideration of the supply pipe diameter. In smaller pipe diameters, takeoff tends to block the water from reaching the other end of the pipe. Therefore, it is advisable to use the larger pipe diameters to prevent these challenges.

Uses of drip takeoff connector as irrigation equipment

  • It is used to connect or match the drip line/drip tape to the water supply pipe.
  • Used to connect polyethylene of 16 mm together with drip start connector to the mainline.

Properties of Hdpe drip takeoff connectors.

  • Easy to connect and disconnect to both drip line.
  • Highly resistant to UV rays.
  • Commonly used with Low Density Polyethylene Pipes (LDPE) and High Density Polyethylene Pipe (HDPE).
  • Internal diameters of 16 millimeters to 0.75 inch.
  • Made of polyethylene material.

 

 

 

Related products

Call Us WhatsApp